ANSI BUTT HINGES
SPECIFICATION
- FINISH: STAINLESS STEEL
- ANSI GRADE: 1 (A156.1 Standard for Butt Hinges)
- UL LISTED
- THICK: 3.4MM AND 4.6MM
- SS GRADE: 304
- 5 KNUCKLE
- Template Drilled
- USE: Suitable for both Metal and Wood doors
SPRING HINGE
SPECIFICATION
- MATERIAL: Steel with steel components. ANSI
- FINISHES: SS Brush, 304 & 316
- GAUGE: 0.134
- SIZE: 89MM X 89MM 102MM X 102MM
FLOOR SPRING DOOR CLOSER
SPECIFICATION
- Spring Strength EN3 EN4
- Standard ≤ 950mm External Door ≤ 1100mm
- Maximum Door Weight 125kg
- Weight in kg 4 kg
- Dimension L 276 W108 H 40
- UL LISTED
CYLINDRICAL LOCKSET
SPECIFICATION
- ANSI
- F76 – PRIVACY LOCK
- F80 – COMMUNICATING LOCK
- F82 – ENTRANCE/OFFICE LOCK
- F84 – CLASSROOM LOCK
- F86 – STOREROOM LOCK
- F88 – VESTIBULE
- Stainless Steel and zinc dichromate Steel
- Independent return springs hold lever in correct horizontal position
- Auxiliary deadlocking latch bolt prevents manipulation when door is closed
- UL LISTED
MORTISE LOCKSET
SPECIFICATION
- ANSI
- 3-5/8" Center, Cylinder to Spindle.2-7/16" Center, Thumbturn to Spindle.Lock case: 4-5/16" x 6" x 1" 1" Throw
- Stainless Steel Deadbolt.
- 3/4" Throw Stainless Steel Latchbolt.
- 1-3/8" to 2-1/2" Steel Door Thickness
- 1-3/4" to 2-1/2" Wood Door Thickness
- Lever: 4-19/32" Length; 2-5/32" Projection; 2-7/16"
- Lever: 4-17/32" Length; 2-1/2" Projection; 2-7/16“
- UL LISTED
DEAD BOLT
SPECIFICATION
- ANSI GRADE: 1 (A156.5) – E2161
- U.L. LISTED for use on 3 hour fire doors
- Warranty 10 years
- Hardened steel housing
- Large Steel Spin ring
- ¼-28 high spring steel mounting screw
EXIT DEVICE WITH MORTISE LOCK
SPECIFICATION
- DEVICE LENGTH: 762MM -for Door size 711MM to 9144MM; 1219MM for Door size from 864MM to 1219MM
- CENTERLINE from finished floor: 1011MM; 1008MM with Mullion
- MECHANICAL 57MM x 57MM
- PROJECTION: Pushbar neutral 97MM; Pushbar depressed: 78MM
- INCLUSIONS: Screw pack for 44MM and 57MM,
- UL LISTED
OVERHEAD DOOR CLOSER
SPECIFICATION
- With adjustable spring sizes 1-4 and 3-6
- 5 lb interior barrier-free opening force on 3’ – 0” wide interior doors
- Hydraulic surface applied rack and pinion closers
- Two separate valves to separately control sweep and latch closing speeds 1800 – 100 and 100 - 00
- With adjustable backcheck to provide cushioning effect in opening
- UL LISTED
FLUSH BOLT
SPECIFICATION
- UL Listed
- Cycle Tested (100,000)
- Conforms to ANSI 156.3 Type 25
- Adjustable Bolt Head Rod
- Finish: US Standard
ROLLER LATCH
SPECIFICATION
- Adjustable Spring tension with nylon roller
- Roller Faceplate: - 1" x 3 3/8" (25 mm x 86 mm)Strike: - 1 1/8" x 2 3/4" (29 mm x 70 mm)
- Strike Gauge: 0.171” (4.3mm) Cast Brass
- Fasteners: - Two (2) #8 x 1" FPHWS - Two (2) #8 - 32 x 3/4" FPHMS - Two (2) #10 x 1-1/2" FPHWS
- Meets ANSI A156.16
- UL LISTED
PUSH PLATE
SPECIFICATION
- Gauge: -0.050” (1mm)
- Material: Aluminum, Stainless Steel
- Meet ANSI A156.6
- Finishes: Mill, Matt, Brush
- UL LISTED
PULL PLATE
SPECIFICATION
- Gauge: -0.050” (1mm)
- Material: Aluminum, Stainless Steel
- Meet ANSI A156.6
- Finishes: Mill, Matt, Brush
- UL LISTED
DUMMY LEVER HANDLE
SPECIFICATION
- forged brass or bronze, and cast stainless steel.
- Also available with escutcheon.
- UL LISTED
DOOR STOPPER
SPECIFICATION
- Meets ANSI A156.16
- Material: Cast, Cast Brass, Bronze, Stainless Steel
- UL LISTED